Welcome to HL Petroleum Equipment Co., Ltd.
简体中文 | English
KNOWLEDGE
All equipment produced by Henglian Petroleum has undergone strict inspections and overloaded operation tests before leaving the factory.
Home » Knowledge » Solid Control Topics » What are the reasons for the vibration and abnormal noise caused by the running of the 32SB180J spray pump and how to eliminate it
knowledge

What are the reasons for the vibration and abnormal noise caused by the running of the 32SB180J spray pump and how to eliminate it

Views: 0     Author: hmudcleaning     Publish Time: 2023-06-15      Origin: Site

Causes of vibration and abnormal noise caused by 32SB180J spray pump on-site operation

1. The impeller wear is unbalanced.

2. Bearing wear.

3. The connection is loose.

4. The pump produces cavitation.

32SB180J spray pump

How to eliminate the vibration and abnormal noise caused by the 32SB180J spray pump on-site operation?

1. Replace the impeller.

2. Replace the bearing.

3. Tighten each loose part.

4. Improve the suction conditions and prevent air from entering the pump.


Xi'an HL Petroleum Equipment Co., Ltd. produces SB6×8 centrifugal sand pumps, slurry pumps, shear pumps, 32SB180J spray pumps, 3PL spray pumps, G-type single screw pumps, etc., welcome to send inquiry to us: sales@hlsolidscontrol.com if you have purchase request of these equipment.